Adding a TURN/STUN service for Avaya WebRTC Connect clients

Last Updated : May 18, 2021 |
Prolog information
  1. Log on to the EMS web interface with administrator credentials.
  2. In the navigation pane, click DMZ ServicesTURN/STUN ServiceTURN/STUN Profiles.
  3. On the TURN/STUN Profiles tab, click Add.
  4. In the Profile Name field, type an appropriate profile name.
  5. In the UDP Listen Port field, type 3478.
  6. In the TCP/TLS Listen Port field, type 443.
  7. In the TLS Server Profile field, select the profile created in Creating a server profile for the TLS TURN relay.
  8. In the Media Relay Port Range field, type a value between 50000 to 55000.
  9. In the Authentication field, enable the authentication.
  10. In the Client Authentication field, enable the authentication.
  11. In the Realm field, specify the SIP domain.
  12. In the UDP Relay field, enable the UDP relay.
  13. Click Finish.
  14. On the TURN Relay tab, click Add.
  15. In the Listen IP field, enter the external interface IP configured on Avaya Aura® Session Border Controller that external clients use.
  16. In the Media Relay IP field, enter the internal IP configured on Avaya Aura® Session Border Controller that Avaya Aura® Web Gateway and Avaya Aura® Media Server use for media.
  17. Keep the Service FQDN field blank.
  18. In the TURN/STUN Profile field, select the TURN/STUN profile that you created.
  19. Click Finish.