Configuring the reason codes and call work codes

최근 업데이트 : Jan 18, 2024 |

About this task

You can set the reason codes for Not Ready (Aux Work) and configure the call work codes so that agents can select the corresponding codes in Avaya Workspaces.

Note:

Perform this procedure for all the Communication Managers configured.

Before you begin

  • Ensure that you configure the following:

    • An account with the Hybrid Voice feature enabled.

    • A system range and user voice plan for the Communication Manager element.

  • Ensure to log in to Application Center Administration as an account administrator.

Procedure

  1. In the navigation tree, click Hybrid Voice > Reason Codes.
  2. From the Aura Communication Manager list, select a Communication Manager name for which you want to configure the reason codes.
  3. To set a reason code for Not Ready (Aux Work), click New Not Ready Code.
  4. On the New Code page, type a number in the Number field.

    The number must not be in use by any other Not Ready code. Also, the new number must be from the defined system range.

  5. In the Name field, type a name.
  6. Optional From the System Defined Attributes list, select an attribute.

    When you define the system range for Communication Manager, the following system-level reason codes are already created and displayed:

    • 0, which is the default reason code

    • Redirection on No Answer

    • ROOF Failure and Unreachable

    • Work on Digital

    For example, when the reason code range in Communication Manager and the system code range in Application Center Administration is set as 1:99 with two-digit Not Ready codes enabled, the following system-level reason codes are created and displayed:

    • 0, which is the default reason code

    • 97, Redirection on No Answer

    • 98, ROOF Failure and Unreachable

    • 99, Work on digital

    Note:

    To enable the agent to set the reason code in the Digital mode after the agent sets Hybrid Voice as not ready, you must configure the Aux Work Reason Code Type parameter with value as requested on Communication Manager.

  7. Click Save.
  8. Click the Call Work tab.
  9. To set a call work code, click New Call Work Code.
  10. In the Number field, type a number.

    The call work code can have a maximum of 16 digits.

  11. In the Name field, type a name.

    You can type maximum of 20 unicode characters.

  12. Click Save.