A coupled bonding conductor (CBC) in the cabinet ground wiring protects the system from lightning. The CBC runs adjacent to wires in a cable and causes mutual coupling with the wires. The mutual coupling reduces the voltage difference between the
Line circuit packs
Circuit Pack Name HP DL360 G7 / HP DL360 G9 / Dell R610 / Dell R620 / Dell R630 TN556D ISDN-BRI 4-wire S/T-NT interface (12 ports) x TN746B analog line (16 ports) x TN754C DCP digital line (4-wire, 8 ports)
Up to two TN2602AP circuit packs may be installed in a single port network for load balancing. The TN2602AP circuit pack is also compatible with and can share load balancing with the TN2302 and TN802B IP Media Processor circuit packs.
Loopback and BERT functions
The loopback and bit error rate testing (BERT) functionality in the MM710 Media Module has the following characteristics: Provides a passive loopback for the far-end in an unpowered state Can be set up for line or payload loopbacks Supports incoming
When you order an MM710 T1/E1 Media Module, you must include the optional 700A loopback jack. With the loopback jack installed, you can loop back the T1 up to the network facility without a dispatch. If the MM710 is sold
MM340 E1/T1 data WAN Media Module
The Avaya MM340 Media Module provides one WAN access port for the connection of an E1 or T1 data WAN. The MM340 may be deployed as an interface to an IP-routed private enterprise network or as an interface to an
MM342 USP data WAN Media Module
The Avaya MM342 Media Module provides one USP WAN access port. The MM342 may be deployed as an interface to an IP-routed private enterprise network or as an interface to an Internet service provider. MM342 is not supported in the
MM710 T1/E1 Media Module LEDs
The MM710 faceplate supports four LEDs. These LEDs include the three standard Media Module LEDs and the SIG LED that indicates that the MM710 Media Module is receiving a valid signal.
MM711 Analog Media Module
The Avaya MM711 Analog Media Module provides features and functionality for analog trunks and telephones. The MM711 is supported in the G450 and G430 Branch Gateways.
MM712 DCP Media Module
Use the MM712 DCP Media Module to connect up to eight two-wire Digital Communications Protocol (DCP) voice terminals. The MM712 is supported in the G450 and G430 Branch Gateways.