Avaya Room System C130 physical layout

Last Updated : Dec 29, 2025 |
Prolog information
Metadata
Keywords:
The following images and table give an overview of the physical layout of the Avaya Room System C130. The labels on the devices that you purchased might slightly differ, but the port function remains the same.
A front view of the codecA rear view of the codec
Number
Name
Description
1.
DC 12V
Power interface.
2.
USB 3.0
USB 3.0 Type-A interface: to connect to an external USB drive, mouse, keyboard, and Avaya Room Microphone Speaker RA63.
3.
USB 3.0
USB 3.0 Type-A interface: to connect to an external USB drive, mouse, keyboard, and Avaya Room Microphone Speaker RA63.
4.
HDMI IN
HDMI IN interface: to connect to a computer for sharing a presentation.
5.
HDMI OUT1
HDMI OUT1 interface: to connect to an external HDTV or other display devices or support audio output.
6.
HDMI OUT2
HDMI OUT2 interface: to connect to an external HDTV or other display devices or support audio output.
7.
Touch/DMIC
To connect to a digital microphone. The digital microphone supports cascading.
8.
LAN
To connect to an Ethernet network or power the codec using PoE.
9.
RESET
Reset button:
  • To retain the current software version when resetting in a powered and idle state, press and hold the Reset button until the codec displays the start-up logo. Release the button to boot up the device.
  • To restore the factory-installed software version in a powered off state, press and hold the Reset button and then power on the codec. Release the button after the primary HDMI output displays Installing System Update.
10.
PC
To connect to a computer using USB-C. The computer detects the codec as a media device.
11.
LINE IN
3.5 mm audio input interface.
12.
LINE OUT
3.5 mm audio output interface.