The MM716 media module provides 24 analog ports supporting phones, modem, and fax. You can also configure these ports as DID trunks with either a wink-start or immediate-start signaling. The 24 ports are provided through a 25-pair RJ21X amphenol connector, which you can connect by an amphenol cable to a breakout box or punch-down block.

You can configure MM716 ports as the following:

• Analog tip/ring devices, such as single-line phones, with or without a LED message waiting indicator

• A wink-start or immediate-start DID trunk

Other MM716 media module hardware features include the following:

• Three ringer loads, which is the Ringer Equivalency Number (REN), for the following loop lengths:

  • 20,000 feet (6096 meters) with a 0.65 mm wire

  • 16,000 feet (4877 meters) with a 0.5 mm wire

  • 10,000 feet (3048 meters) with a 0.4 mm wire

  With ringer load of .1 or less, the supported loop length is 20,000 feet (6096 meters) with a 0.65 mm, 0.5 mm, and 0.4 mm wire.

• Up to 24 simultaneously ringing ports

• Type 1 caller ID

• Ring voltage generation for a variety of international frequencies and cadences

The MM716 media module is compatible with Avaya Aura® Communication Manager Release 3.1 and later, and Branch Gateway firmware version 29.x.x and later.