Configuring Binary Floor Control Protocol

Last Updated : Sep 25, 2023 |

Procedure

  1. Log in to the EMS web interface with administrator credentials.
  2. From the Device menu, click the SBC name to administer.
  3. On the dashboard, click Domain Policies > Media Rules.
  4. On the Media Rules page, click the Advanced tab.
  5. Select the BFCP Enabled check box.

    The media rule included in the endpoint policy group must be applied to the subscriber side and server side.

  6. In the navigation pane, click Network & Flows > Media Interface.
  7. On the Media Interface page, click Add.

    The EMS server displays the Add Media Interface dialog box.

  8. In the Name field, type the name of the media interface.

    The IP Address field is pre-populated with the Media Interface IP address.

  9. In the Port Range field, enter the TCP port range.

    The default range is 35000 to 40000.