Swapping an EMS server in a single server deployment

Last Updated : Jun 01, 2023 |
Prolog information
Metadata
Keywords:
Before you begin
Confirm that you have created and saved the backup file of a functional EMS server.
  1. Log in to the EMS web interface with the administrator credentials.
  2. In the navigation pane, click Device Management.
    STEP RESULT:
    The EMS server displays the Device Management screen in the content area.
  3. On the Device Management page, click Devices tab.
  4. When the state of the EMS becomes Commissioned, click Swap Device.
    ADDITIONAL INFORMATION:
    Note:
    The EMS server displays the Swap Device option only when there is no SBC device installed on the system.
  5. Select the backup file of old EMS device.
    ADDITIONAL INFORMATION:
    Important:
    The backup file is a master .tar file. Avaya recommends not to unzip the .tar file.
  6. Click Finish to complete the EMS swap.
Related links
Swapping a primary EMS server in an HA pair deploymentSwapping a secondary EMS server in an HA pair deploymentRestarting an Avaya SBC application