Configuring frontend configuration

Last Updated : May 30, 2023 |
Prolog information
Metadata
Keywords:
  1. On the New TCP load balancer screen, click Frontend configuration.
  2. In the Name field, type the name.
  3. On the Frontend configuration screen, perform the following:
    1. For IP version, select IPv4.
    2. From Network Service Tier, select Premium.
    3. In IP Address, enter the IP address gathered from the front end configuration.
      ADDITIONAL INFORMATION:
      Note:
      Do not enable the Passthrough flag.
    4. For Ports, select All.
  4. Click Done.