Changing the network parameters for an Appliance Virtualization Platform host

Last Updated : Oct 04, 2021 |

About this task

Use this procedure to change the network parameters of Appliance Virtualization Platform after deployment. You can change network parameters only for the Appliance Virtualization Platform host.

Note:

If you connect to Appliance Virtualization Platform through the public management interface, you might lose connection during the process. Therefore, after the IP address changes, close the Solution Deployment Manager client and restart the client by using the new IP address to reconnect.

Before you begin

Install the Solution Deployment Manager client on your computer.

Procedure

  1. On the desktop, click the SDM icon (Icon used to open the Solution Deployment Manager client dashboard), and then click Application Management.
  2. In Application Management Tree, select a location.
  3. On the Platforms tab, in the Platforms for Selected Location <location name> section, select an Appliance Virtualization Platform host and click Change Network Params > Change Host IP Settings.
  4. In the Host Network/ IP Settings section, change the IP address, subnet mask, and other parameters as appropriate.
    Note:

    An Avaya Aura® Appliance Virtualization Platform host and all virtual machines running on the host must be on the same subnet mask.

    If Out of Band Management is configured in an Avaya Aura® Appliance Virtualization Platform deployment, you need two subnet masks, one for each of the following:

    • Public or signaling traffic, Avaya Aura® Appliance Virtualization Platform, and all virtual machines public traffic.

    • Management, Avaya Aura® Appliance Virtualization Platform, and all virtual machine management ports.

  5. To change the gateway IP address, do the following:
    1. Click Change Gateway.

      The Gateway field becomes available for providing the IP address.

    2. In Gateway, change the IP address.
    3. Click Save Gateway.
  6. Click Save.

    The system updates the Appliance Virtualization Platform host information.

Related information
Change Network Parameters field descriptions