Configuring the tenant network for IP Office

Last Updated : May 29, 2023 |

About this task

Use this procedure to configure the tenant network for communicating with tenant IP Office deployments. Avaya SBC needs an address on B1 for communicating with tenant IP Office deployments.

Procedure

  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Network & Flows > Network Management.

    The EMS server displays the Network Management page.

  3. On the Network Management page, click the Networks tab.
  4. Click Add.
  5. In the Name field, enter B1-tenant-IPO.
  6. In the Gateway field, enter 192.168.1.1.
  7. In the Subnet mask field, enter 255.255.255.0.
  8. In the Interface field, select B1.
  9. In the IP address field, enter 192.168.1.10.
  10. Click Finish.