The netconfig utility

Last Updated : May 20, 2014 |
Prolog information
This information does not apply to the Software-Only server. The Software-Only server uses a different version of netconfig.
AE Services provides a customized version of the netconfig utility, which allows you to configure network information for the AE Server. The netconfig utility is located in /opt/mvap/bin. When you type netconfig AE Services displays a screen, which contains settings for the AE Server such as its: hostname, DNS Domain, DNS Server, network interface settings, and default gateway. Whenever you need to change these settings use the netconfig utility.
The table provides an example of the Network Information Configuration screen settings for an AE Server with multiple network interfaces (eth0, eth1, eth2, and eth3).
The netconfig utility - Network Information Configuration settings
Comments
Hostname
aeserver
Host name of the AE Server
DNS Domain
example.com
Name of the DNS server
DNS Server
192.168.123.44
IP address of the DNS server.
Interface
Type
Address
Netmask
Enable
Comments
eth0
[ ]
192.168.123.43
255.255.255.0
[x]
eth0 is usually assigned the IP address for client access.
eth1
[ ]
192.168.123.42
255.255.255.0
[x]
eth1 is reserved for on-site technician use.
eth2
[ ]
192.168.123.41
255.255.255.0
[x]
eth2 is usually assigned the IP address for Communication Manager access (Private LAN).
eth3
[
[ ]
Reserved
eth4
[ ]
[ ]
Reserved
Comments
Default Gateway
192.168.12.344
The IP address of the network router.
Note:
Instead of rebooting AE Services VM, the DB Service and AESVCS should be restarted. The AE Services cannot be rebooted without checking the status.