System Logging field descriptions

Last Updated : Oct 04, 2021 |
Prolog information
Name
Description
Enable Remote Logging
Enables or disables remote logging.
Hostname (FQDN)/IP Address
IP address or a fully qualified domain name.
A blank value is not allowed.
Port
Value of the port. The value can either be 514, or in the range of 1024 through 65535.
Protocol
Protocol for sending log files to the remote server.
The options are:
Enable TLS Remote Logging
Enables TLS remote logging for secure and non-secure connections between AE Services and the rsyslog server.
You must install a client certificate with the certificate alias as a syslog server to enable TLS remote logging.
The options are:
Common name of Remote Server Certificate
Common name of the rsyslog server identity certificate.
By default, this field is empty.
If Enable TLS Remote Logging is set to YES, you must enter the common name of the rsyslog server identity certificate in this field.
Certificate Revocation Validation
Specifies the validation method for the certificate revocation check.
The options are:
Note:
The Certificate Revocation Validation field is available from Release 8.1.3 and later.
OCSP Local URI
Specifies a local OCSP responder URI. This field is required if OCSP URI Preference is set to Local.
Note:
The OCSP URI Preference field is available from Release 8.1.3 and later.
OCSP URI Preference
Specifies which OCSP responder URL is used first for revocation check.
The options are:
Note:
The OCSP URI Preference field is available from Release 8.1.3 and later.
Facility
The facility ID. The value range is local0 through local7.