Powering off and restarting the codec

Last Updated : Sep 03, 2024 |

About this task

On the Power Control page, you can turn off the codec. Alternatively, you can unplug the Ethernet cable from Avaya Room System C130. For Avaya Room System C170 and Avaya Room System C190, you can unplug the power cable or use the power switch on the back panel.

From the Power Control page, you can also restart the codec if there is an error or you need to apply the configured updates.

Procedure

  1. On the web interface navigation menu, go to Control > Power Control.
  2. On the Power Control page, do one of the following:

    • To turn off the codec, click Power Off.

    • To restart the codec, click Restart.

  3. In the confirmation dialog box, click Yes.