Administering the Off-PBX-Telephone Station-Mapping screen

Last Updated : Jun 20, 2013 |

About this task

The following procedure is optional. Administer the screen to change the default values.

Procedure

  1. At the command prompt, type change off-pbx-telephone station-mapping xxx, where xxx is the extension number. Press Enter.
  2. In the Application field, select OPS.
  3. In the Mapping Mode field, select both.
  4. In the Calls Allowed field, select all.
  5. In the Bridged Calls field, select none.
  6. Press Enter to save the changes.