Verifying the acceptance criteria

Last Updated : Nov 13, 2024 |
Prolog information
Metadata
Keywords:
Check that the selected media gateways and media-servers are now under control of the main server by performing the following steps
  1. On the main server, run the list media-gateway command, and verify the following:
    • All media gateways are listed.
    • The status of all media gateways is shown as up.
  2. On the survivable core server, run the list media-gateway command, and verify the following:
    • All media gateways are listed.
    • The status of all media gateways is shown as down.
  3. Place a telephone call between two media gateways that are being tested. If only one media gateway was tested, skip to step 4. Verify that you have a two way talk path.
  4. Place a telephone call between two media gateways that were not selected for this test. Verify that you have a two way talk path.
  5. Place a telephone call between a media gateway being tested and one that is not being tested. Verify that you have a two way talk path.