Setting the dialing mode

Last Updated : Jun 25, 2020 |
Prolog information
Metadata
Keywords:
Use this procedure to set the dialing method used to initiate dialing.
  1. Press Main menuSettingsPhone Settings.
  2. Press Main Menu.
  3. Use the Down Arrow key to go to the Dial mode screen.
  4. Press Toggle to select one of the following options:
    • Manual: Press the Call soft key to start a call.
      Note:
      In the IP Office environment, use the Manual mode.
    • Auto: Ensure that the dialed digits match the dial plan to start a call.
    • Default: Press the Call soft key to start a call.
  5. Press Save.