With Avaya J100 Expansion Module (JEM24), you can extend the number of call appearances and feature buttons on Avaya J169/J179 IP Phone and Avaya J189 IP Phone. The call appearances and features appears on Avaya J100 Expansion Module and the corresponding lines of the phone.
You can connect a maximum of three expansion modules to Avaya J169/J179 IP Phone and two expansion modules to Avaya J189 IP Phone. Avaya J189 IP Phone also has a secondary screen that behaves as an inbuilt module. When an expansion module is connected to a phone, it inherits the display properties of the phone.
The following table shows the number of available lines corresponding to the number of button modules attached to the phone:
Expansion modules |
Calling lines / Features / Applications |
Switching between pages |
1 |
72 (24 on each page) |
Yes |
2 |
24 |
No |
3 |
24 |
No |
You cannot use the toggle button on the JEM24 in the following scenarios:
The following table shows the number of physical feature keys available on the J100 phone models and JEM24s:
Phone model |
Features keys on the phone |
Features keys on built-in expansion module |
Features keys on JEM24 expansion module |
J129 |
3 |
NA |
Does not support JEM24 |
J139 |
4 |
NA |
Does not support JEM24 |
J159 |
4 |
6 |
Does not support JEM24 |
J169 |
8 |
NA |
24 |
J179 |
8 |
NA |
24 |
J189 |
10 |
6 |
24 |
The following table shows the number of feature keys available on the J100 phone models and JEM24s:
Phone model |
Feature keys accessible on the phone screen |
Feature keys accessible on the built in Expansion Module using the JEM24 toggle button |
Feature keys accessible with only one Expansion Module |
Feature keys accessible on first JEM24 when there is more than one JEM24 |
Feature keys accessible on 2nd JEM24 |
Feature keys accessible on 3rd JEM24 |
J129 |
NA |
NA |
NA |
NA |
NA |
NA |
J139 |
96 |
NA |
NA |
NA |
NA |
NA |
J159 |
96 |
25-48 |
NA |
NA |
NA |
NA |
J169 |
96 |
NA |
25-96 |
25-48 |
49-72 |
73-96 |
J179 |
96 |
NA |
25-96 |
25-48 |
49-72 |
73-96 |
J189 |
96 |
25-48 |
49-72 |
49-72 |
73-96 |
NA |
Avaya J100 Expansion Module can be placed in two stand positions and a wall-mount position with the phone.
Note:
The wall mounting bracket for Avaya J100 Expansion Module must be ordered separately, along with the wall mounting kit. For Avaya J100 Expansion Module wall mounting instructions, see Installing and Administering Avaya J100 Series IP Phones.
If you use PoE to power up your phone, you can attach only one expansion module. To attach more expansion modules, use a power supply unit.
Important:
Avaya J100 Expansion Module does not support hot-plugging. Connect all Avaya J100 Expansion Modules to the phone before connecting the phone to a power source.
