Configuring the network interfaces

Last Updated : Jun 02, 2023 |

Procedure

  1. On the Networking tab, click Add network interface.
  2. Choose a network.
  3. If there are multiple subnets in the VPC network, choose a subnet.
  4. To assign a custom internal IP address to the interface, on the Internal IP drop-down menu, choose Custom and then type the IP address.
  5. To indicate that you do not want an external IP address, on the External IP drop-down menu, choose None.
  6. To assign a static external IP address, on the External IP drop-down menu, choose New static IP, type Name and Description, and click Reserve.
  7. To add more network interfaces, click Add network interface and follow steps 2-6 above.
    Note:

    Add four network interfaces in the following order: SBC_B1, SBC_A1, SBC_M1, and SBC_M2.

  8. On the Management page, in the Metadata section, configure the following fields:

    • Set the Key 1 field to nic0 and Value 1 field to B1.

    • Set the Key 2 field to nic1 and Value 2 field to A1.

    • Set the Key 3 field to nic2 and Value 3 field to M1.

    • Set the Key 4 field to nic3 and Value 4 field to M2.