Customer configuration data for Application Enablement Services

Last Updated : Feb 10, 2020 |
Prolog information
Metadata
Keywords:
The following table identifies the key customer configuration information that will be required throughout the deployment and configuration process for Application Enablement Services.
Required Data
Description
Example value for the system
Hostname or fully-qualified domain name
Hostname or fully-qualified domain name for the virtual machine.
aesserver1
DNS
DNS search path.
Note:
If you leave this value blank, modify or add the line search <dns search path> in the file etc/resolv.conf after you deploy the Application Enablement Services virtual machine successfully.
example.com
Default Gateway
Default gateway address for the virtual machine.
123.45.67.254
DNS IP Address
Domain name servers for the virtual machine.
123.45.1.2
IP address
IP address for the virtual machine interface for eth0 (Public interface).
123.45.67.89
Netmask
Netmask or prefix for the virtual machine interface for eth0 (Public interface).
255.255.255.0
IP address
IP address for the virtual machine interface for eth1 (Private interface) (optional).
123.45.67.90
Netmask
Enter the Netmask or prefix for the virtual machine interface for eth1 (Private interface) (optional).
255.255.255.0
IP address
IP address for the virtual machine interface for eth2 (optional).
For IPv4: 192.168.x.x
For IPv6: 2001:0db8::a
Netmask
Netmask or prefix for the virtual machine interface for eth2 (optional).
255.255.0.0
NTP Server
Network Time Protocol (NTP) hostname or IP address (optional).
For IPv4: 172.16.x.x
For IPv6: 2001:0db8::b
EASG status
EASG
Enable or Disable
Data Encryption
Data Encryption
Enable or Disable
Note:
  • DHCP will not take effect until you configure it from the command line after initial deployment.
  • Do not expect Application Enablement Services to initiate DHCP on first boot.
  • Avaya recommends that you do not use DHCP with Application Enablement Services.