Applying rules to packets with DSCP values

Last Updated : Nov 06, 2012 |
Prolog information
  1. Use the dscp command, followed by a DSCP value (from 0 to 63) to apply the rule to all packets with the specified DSCP value.
    For example, the following rule is defined to capture all VoIP Bearer packets (DSCP = 46):
    Gxxx-001(super)# ip capture-list 520
    Gxxx-001(super-Capture 520)# ip-rule 20
    Gxxx-001(super-Capture 520/ip rule 20)# composite-operation capture
    Done!
    Gxxx-001(super-Capture 520/ip rule 20)# dscp 46
    Done!
    Gxxx-001(super-Capture 520/ip rule 20)#