To load single firmware files on a Branch Gateway, you must put the files on a computer connected to the customer’s LAN in the customer’s network. You log on to the Branch Gateway later and use the gateway's SCP, FTP, TFTP or HTTPS capability to download the new firmware. Set up a SCP, FTP, TFTP or HTTPS server on the LAN.
Note:
Use a Linux or Unix SCP, FTP, TFTP or HTTPS server only if a Linux or Unix SCP, FTP, TFTP or HTTPS server already exists on the local network. In this case, download the appropriate files to your laptop and give it to the customer for proper placement and execution.
