Administering the ARS analysis table

Last Updated : Sep 19, 2013 |
Prolog information
Metadata
Keywords:
  1. On the Communication Manager SAT interface, type change ars analysis x, where x is a digit string, and press Enter.
    ADDITIONAL INFORMATION:
    The system displays the ARS DIGIT ANALYSIS TABLE screen.
  2. In the Dialed String field, type the digits.
  3. In the Min field, type the minimum number of allowed digits.
  4. In the Max field, type the maximum number of allowed digits.
  5. In the Route Pattern field, type the route pattern number.
  6. In the Call Type field, type the appropriate call type.
    ADDITIONAL INFORMATION:
    For administering Communication Manager as a feature server and trunk gateway, type pubu.
  7. Save the changes.
    ADDITIONAL INFORMATION:
    The following table specifies the values that you can enter in the fields.
    Dialed String
    Total Min
    Total Max
    Route Pattern
    Call Type
    ANI Reqd
    1
    11
    11
    10
    natl
    n
    101xxxx0
    8
    8
    deny
    op
    n
    101xxxx0
    18
    18
    deny
    op
    n
    101xxxx01
    16
    24
    deny
    iop
    n
    101xxxx011
    17
    25
    deny
    intl
    n
    101xxxx1
    18
    18
    deny
    fnpa
    n
    10xxx0
    6
    6
    deny
    op
    n
    10xxx0
    16
    16
    deny
    op
    n
    10xxx01
    14
    22
    deny
    iop
    n
    10xxx011
    15
    23
    deny
    intl
    n
    10xxx1
    16
    16
    deny
    fnpa
    n
    1200
    11
    11
    deny
    fnpa
    n
    1209
    11
    11
    10
    natl
    n
    1300
    11
    11
    deny
    fnpa
    n
    1400
    11
    11
    deny
    fnpa
    n