Long private numbering and public signaling

Last Updated : Sep 20, 2013 |
Prolog information
Metadata
Keywords:
Long private numbering uses the private extension with a prefix. In Session Manager, you must administer the private long number and the public number are administered. In Communication Manager, the administration changes the private long number to the extension and changes the outgoing direction to the public number.
The configuration for long private numbering and public signaling is for the following numbering types:
  • Registration numbering type: private long
  • Signaled numbering type: public
The following table describes the administration settings for the long private numbering.
SAT screen
Page number
Field
Value
Notes
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION
1
Phone Number
Long private extension number
1
Trunk Selection
For 90xxSIP station types, set the value of the Trunk Selection field is on the STATION screen.
TRUNK GROUP
3
Numbering Format
AAR DIGIT ANALYSIS TABLE
1
Dialed String
Long private extension number
The value of the Dialed String field is an extension or a pattern of extensions.
1
Route Pattern
Pattern to route to Session Manager
1
Call Type
NUMBERING - PRIVATE FORMAT
1
No entries.
NUMBERING - PUBLIC/UNKNOWN FORMAT
1
Ext Len
Extension length
1
Ext Code
Extension number or pattern for extension numbers
1
Trk Grp (s)
Trunk number or blank
Blank means the setting applies to all trunks.
1
CPN Prefix
Public prefix to the extension without the plus (+) sign. The system adds the plus (+) sign.
1
Total Len
Extension length and CPN prefix
ROUTE PATTERN
1
Grp Num
Trunk group
Lists trunk groups with the trunks to primary Session Manager listed first.
1
FRL
1
Numbering format
INCOMING CALL HANDLING TREATMENT
1
Len
Length of public long number
1
Number Digits
Public prefix
1
Del
Length of public prefix
1
Insert
blank
INCOMING CALL HANDLING TREATMENT
1
Len
Length of private long number
1
Number Digits
Private prefix
1
Del
Length of private prefix
1
Insert
blank