Assigning community for Port Network

Last Updated : Feb 16, 2017 |
Prolog information
Metadata
Keywords:
For more information to administer the Port Networks screen, see Avaya Aura® Communication Manager Screen Reference.
  1. Run the change system-parameters port-networks command to administer the Community Assignments for Port Networks screen and the Port Network Recovery Rules screen.
  2. In the Community Assignments for Port Networks screen, enter the community assignments for each port network.
    ADDITIONAL INFORMATION:
    Note:
    Assigning port networks to a community associates the port network with a survivable core server administered with the Local Preferred or as a Local Only server. A survivable core server is assigned a community on page one of the Community Assignments for Port Networks screen. To have the survivable core server and the port networks in the same community, the community number of the survivable core server and the community number for each port network must match.
  3. In the Port Network Recovery Rules screen schedule the Auto Return feature and set the no service timer:
  4. The Auto Return feature is used to administer one of the following options:
    • no: When the value is set to no, the port networks cannot automatically return to the control of the main server. No additional fields display when the value is set to no.
    • schedule: Enter schedule to schedule a day and time to return the port networks to the control of the main server. When the value is set to scheduled, the day and time fields display. The schedule can be set up to seven days prior to its activation.
    • day: Enter the day of the week.
    • time: Enter the time of day in a 24 hour (military) format.
    • yes: When the value is set to yes the IPSI Connect up time field displays. When Auto Return is set to yes the port networks can automatically return to the main server after the value set in the IPSI Connect up time expires.
    • IPSI Connect up time: Enter the number of minutes that the IPSI will wait to return to the main server after communication with the main server is restored. Valid values for this field are from
    • minutes.
  • In the No Service Time Out Interval field enter the time, in minutes, that the IPSIs will wait before requesting service from the highest survivable core server on its priority list.
    ADDITIONAL INFORMATION:
    Valid values for this field are from
  • minutes. The default value is
  • In the PN Cold Reset Delay Timer field specify the time in seconds after which the PN cold reset occurs.
    ADDITIONAL INFORMATION:
    Valid values are from
  • . The default value is