LED lighting sequence for G450

Last Updated : Sep 01, 2023 |

The LED lighting sequence for the G450 is as follows:

  1. The PWR LED on the front panel turns on, indicating the status of the power supply unit.

  2. The CPU LED turns on if the firmware is running.

  3. At least one LED on each media module turns on, then turns off after about 20 seconds.

The yellow Card In Use LED indicates the status of the flash card:

  • If the LED is ON steady, the Compact Flash is inserted but is not being used.

  • If the LED is flashing, the Compact Flash is in use.

    Warning:

    Do not remove the Compact Flash when the backup of the G450 announcements files is in progress. Doing so may corrupt the data on the Compact Flash.

  • If the LED is OFF, no Compact Flash is inserted, or you can remove the Compact Flash (G450 2.x and 3.x).

  • If the LED is OFF or ON steady, you can remove the Compact Flash (G450 1.x and 4.x).

  • If the LED is flashing, do not remove the Compact Flash.