Testing IP Office Demo

Last Updated : Jun 25, 2024 |

About this task

Use this procedure to confirm that IP Office Demo is installed and functioning correctly.

Start VMware Workstation Pro.
Select IP Office Demo.
Open the drop-down menu and click Start Up Guest.
Test connectivity.
1. Ping 192.168.42.230 from the host Windows computer to verify connectivity to the virtual machine.
2. Open Web Control and in a browser, enter the address https://192.168.42.230:7071.
3. Login with user ID Administrator and password Administrator.
4. In the menu bar, click System.
5. Confirm that the status for the three software components, IP Office Demo, Voicemail Pro and Avaya one-X Portal are running. If not, click Start All to start the software components.
Test endpoint connectivity.
1. From each extension, dial the other endpoints.
2. Dial the hunt groups.
Test Voicemail Pro.
1. From a softphone, call the IP phone at extension 103 and leave a message.
2. To access the message, dial *17 and follow the prompts.
  
  The password for all voicemail accounts is the same as the extension number.
Test Avaya one-X® Portal for IP Office.
1. On the Web Control home page, click one-X Portal Administration.
2. On the Avaya one-X® Portal for IP Office web page, click User Login.
3. Open a user home page by entering one of the following User Name and Password combinations:
  - Alice and 101
  - Bob and 102
  - Carol and 103
4. Make a test call, test the directory, and listen to a voicemail.

Send Feedback