Log in to the EMS web interface with administrator credentials.
From the Device menu, click the SBC name to administer.
In the navigation pane, click Services > SIP Servers.
The EMS server displays the SIP Servers page.
In the application pane, click Add.
The EMS server displays the Add Server Configuration Profile window.
Enter a name for the server profile.
Click Next.
The EMS server displays the Add Server Configuration Profile – General window.
In the Server Type field, click Call Server.
In the IP Address/Supported FQDNs field, enter the IP address or FQDN of Session Manager.
In the Transport field, click transport protocol of Session Manager.
Note:
Avaya recommends the use of TLS as TLS is secure and supports Presence Services.
If the call server uses a different IP or FQDN, protocol, and port, click Add to add a new entry.
Depending on the selected Transport option, enter the relevant port number. For example, if you select TLS as the transport mode, then in the TLS Port field, type the TLS port number.
Note:
The default port number for TCP and UDP is 5060.
The default port number for TLS is 5061.
Click Next.
The EMS server displays the Add Server Configuration Profile – Authentication window.
If you use server authentication, type the related information in the Add Server Configuration Profile – Authentication window.
Note:
For remote workers that use an Avaya Aura® network, leave these fields blank.
Click Next.
The EMS server displays the Add Server Configuration Profile – Heartbeat window.
Select the Enable Heartbeat check box to establish a heartbeat.
Select appropriate values in the Method, From URI, and To URI fields for sending heartbeat messages towards the server.
For a single Session Manager instance, leave these fields blank.
Click Next.
The system displays the Add Server Configuration Profile – Advanced window.
In the Interworking Profile field, select the interworking profile as avaya-ru-multism.
Select the Enable Grooming check box.
In the TLS Client Profile field, click the default TLS profile.
For the other fields, do not change the default parameters.
