The master WebLM server and the local WebLM server must be in the same IP mode either IPv4 or IPv6.
Name
Description
IPv4 Address
The IPv4 address of the WebLM virtual machine.
Netmask
The IPv4 subnetwork mask to assign to the WebLM virtual machine.
IPv4 Default Gateway
The gateway IPv4 address to assign to the WebLM virtual machine.
IP Address of DNS Server
The DNS IPv4 address to assign to the WebLM virtual machine. Separate the IP addresses with commas (,).
Short Hostname
The short hostname to assign to the WebLM virtual machine.
IPv6 Address
The IPv6 address of the WebLM virtual machine.
IPv6 Network Prefix
The IPv6 subnetwork mask to assign to the WebLM virtual machine.
IPv6 Gateway
The gateway IPv6 address to assign to the WebLM virtual machine.
Domain Name
The domain name of the WebLM virtual machine.
Default Search List
The short hostname to assign to the WebLM virtual machine.
NTP Server IP/FQDN
The IP address or FQDN of the NTP server.
The field is optional. Separate the IP addresses with commas (,).
Timezone
The timezone where the WebLM virtual machine is located. A list is available where you select the name of the continent and the name of the country.
Name
Description
WebLM command line user name
Specifies the WebLM command line user name.
Note:
Do not provide the common user names, such as, admin, csaadmin, postgres, root, bin, daemon, adm, sync, dbus, vcsa, ntp, saslauth, sshd, tcpdump, xfs, rpc, rpcuser, nfsnobody, craft, inads, init, rasaccess, sroot, postgres, smgr, and nortel.
Do not use the user names, such as, admin and csadmin.
WebLM command line user password
Specifies the WebLM command line user password.
Confirm Password
Re-type the WebLM command line user password.
Name
Description
WebLM UI admin user Password
Specifies the WebLM admin user password.
Note:
Do not use the default password for admin.
Confirm Password
Re-type the WebLM admin user password.
Enhanced Access Security Gateway (EASG) - EASG User Access
Name
Description
Enter 1 to Enable EASG (Recommended) or 2 to Disable EASG
Enables or disables Avaya Logins for Avaya Services to perform the required maintenance tasks.
The options are:
1: To enable EASG.
2: To disable EASG.
Avaya recommends that you enable EASG.
You can also enable EASG after deploying or upgrading the application using the command: EASGManage --enableEASG.
Button
Description
Deploy
Displays the EULA acceptance screen. To accept EULA and start the deployment process, click Accept.
