Use the Avaya Breeze® > Configuration > Service Ports page to:
Assign or reserve ports for Avaya-developed snap-ins.
Administer ports enablement for Avaya-developed snap-ins.
The Service Ports page displays the default ports for a snap-in after you load the snap-in. You can override the default port value for the snap-in at the snap-in level and cluster level from this page.
Procedure
In System Manager, click Elements > Avaya Breeze®.
In the left navigation pane, click Configuration > Service Ports.
From the Service field, select the snap-in for which you want to configure the ports.
The system displays the assigned snap-in ports for the snap-in that you selected.
(Optional) From the Cluster field, select the cluster.
The system displays the selected snap-in ports for the snap-in and the cluster that you selected.
From the Selected Service Ports table, specify the ports that you want to assign to the snap-in.
Select the Override Default check box to override the default port value.
Note:
If the specified Effective Port value is already assigned to another snap-in or a reserved port, the system displays an error message. Specify another override port value.
Port validation is done when you install the snap-in whose ports are specified.
The field Protocol displays the protocol that will be used by the specified port for communication. This field cannot updated from the Service ports page.
Click Commit.
The All Service Used/System Reserved Ports table displays the ports used by other snap-ins and the system reserved ports. Search for a specific port from this table before you assign the port to a snap-in.
To swap two ports, such as 1100 and 1200, do the following:
Update port 1100 to 1108 and then click Commit.
1108 is just a placeholder. Ensure that port 1108 is unused.
