With a codec IP address, you can make conference calls only to other codecs. The administrator must unregister all SIP or H.323 users to join the call before you can use this method for conference calling.
Before you begin
Ensure the following:
You purchased an EMCU license for the codec from which you want to manage conference calls. For more information about purchasing the EMCU license, contact Avaya Support.
The administrator imported the license and enabled it in your codec settings. For more information about configuring the codec as an EMCU, see the Call settings section of the Configuration in the web interface chapter in Installing and Administering Avaya Room System C100 Series.
The administrator unregistered all SIP or H.323 users to join the call, including your codec account. For more information about configuring a SIP or H.323 account, see the Global settings section of the Configuration in the web interface chapter in Installing and Administering Avaya Room System C100 Series.
You connected a video source for presentation sharing, such as an HD camera, if you want to send a presentation to the conference call participants.
From the codec with the installed EMCU license, on the Join Meeting menu, enter the IP address of the codec to call and select the Call icon.
STEP RESULT:
If Auto Answer is enabled on the codec you are calling, the call is immediately established.
If Auto Answer is disabled, the call recipient needs to accept an incoming call first.
Press the Menu button on the remote control.
On the conference menu, select .
To add more participants to the conference call, select Add Participant, and on the Add Participant window, enter the codec IP address of the participant and select Confirm.
ADDITIONAL INFORMATION:
If you accept an incoming call during your conference call, the caller automatically joins the conference. You can remove an erroneously added participant by editing the participant list.
To view and manage the list of current call participants, select Participant List.
STEP RESULT:
At the bottom of the Conference Control window, you can see the list of call participants, mute their incoming and outgoing audio, assign a presenter role for Speaker mode, or drop them from the call.
To mute the codec audio during the conference call, select Mute.
To adjust the conference call mode, select Meeting Mode and select one of the following options:
Speaker Mode: Assign a presenter role to a calling party from the participant list, and the codec identifies it as the primary audio and video source. All other participants can hear its audio and view the presentation but cannot talk to each other.
Discussion Mode: All conference participants can hear and talk to each other.
To send a presentation from the connected video source, return to the conference menu and select .
To set the conference video layout for call participants, on the conference call menu, select and select the layout for the appropriate output and mode.
ADDITIONAL INFORMATION:
You can select the video layout for local and remote call participants and for Presentation mode. You can also set the layout separately for HDMI 1 and 2 outputs.
To disable or enable the video output from the camera, select .
To view the call information, return to the conference call menu and select .
STEP RESULT:
On the Call Status window, you can see the following details for each calling party: phone number, connection type, encryption details, general call bandwidth, audio, video, and network information. You can select Next at the top of the window to view call details for the next calling party.
To end the conference call, on the conference call menu, select , and on the confirmation window, select Out of the conference.