Managing an MCU conference call

Last Updated : Dec 10, 2025 |
Prolog information
Metadata
Keywords:
With an MCU license, you can use the codec as the conferencing unit and manage conference calls from the GUI menu. You can create a conference by establishing a two-party call and then adding more participants from the codec Conference menu. You can access conferencing options by pressing the Menu button on the remote control during a conference call.
From the Conference menu, you can add or remove participants, select the conference mode, mute codec and participant audio, disable or enable the camera, and send a presentation from the connected video source. You can also view the list of participants and general call information.
You can join a conference call in the following ways:
  • By accepting an incoming call from the codec. The conference host adds participants during an active conference call.
  • By directly calling the codec with an installed MCU license using the codec IP address or registered SIP or H.323 account.
Before you begin
Ensure that you have done the following:
  • Purchased an MCU license from Avaya. For more information about purchasing the MCU license, contact Avaya Support.
  • Joined or started a conference call from the Meeting menu.
  • Connected a video source for presentation sharing, such as a computer or HD camera, if you want to send a presentation to the conference call participants.
  1. During a conference call, press the Menu button on the remote control.
  2. On the conference menu, select the Speaker icon.
  3. To view and manage the list of current call participants, select Participant List.
    STEP RESULT:
    At the bottom of the Conference Control window, you can see the list of call participants, mute their incoming and outgoing audio, assign a presenter role for Speaker mode, or drop them from the call.
  4. To mute the codec audio during the conference call, select Mute.
  5. To adjust the conference call mode, select Meeting Mode and select one of the following options:
    • Speaker Mode: Assign a presenter role to a calling party from the participant list, and the codec identifies it as the primary audio and video source. All other participants can hear its audio and view the presentation but cannot talk to each other.
    • Discussion Mode: All conference participants can hear and talk to each other.
  6. To add more participants to the conference call, select Add Participant, and on the Add Participant window, enter the participant number or select a local contact and select Confirm.
    ADDITIONAL INFORMATION:
    You can also add participants to a conference call by calling them directly from the GUI or web interface menu.
  7. To send a presentation from the connected video source, return to the conference menu and select the Presentation icon.
  8. To set the conference video layout for call participants, on the conference call menu, select the Layout icon and select the layout for the appropriate output and mode.
    ADDITIONAL INFORMATION:
    You can select the video layout for local and remote call participants and for Presentation mode. You can also set the layout separately for HDMI 1 and 2 outputs.
  9. To disable or enable the video output from the camera, select the Video Mute icon.
  10. To view the call information, return to the conference call menu and select the Call Information icon.
    STEP RESULT:
    On the Call Status window, you can see the following details for each calling party: phone number, connection type, encryption details, general call bandwidth, audio, video, and network information. You can select Next at the top of the window to view call details for the next calling party.
  11. To end the conference call, on the conference call menu, select the End Call icon, and on the confirmation window, select Out of the conference.