For more information about these commands, see Avaya Branch Gateway G450 CLI Reference.
|
Root level command
|
Command
|
Description
|
|
interface (serial| fastethernet| dialer)
|
-
|
Enter the Serial, FastEthernet, or Dialer interface configuration context
|
|
-
|
priority-queue
|
Enable or disable priority queuing mode in a Serial or FastEthernet interface.
By default, priority queuing is off, and WFVQ is enabled on all serial interfaces and all FastEthernet interfaces for which traffic-shaping is enabled.
|
|
-
|
no priority-queue
|
Disable priority queing and re-enable WFVQ.
|
|
-
|
queue-limit
|
Set the size of any of the four priority queues, in packets, for a given interface or interface type. The default sizes depend on the bandwidth of the interface.
|
|
-
|
no queue-limit
|
Restore the packet size to its default value, using the interface bandwidth
|
|
-
|
voip-queue
|
Enable or disable custom queueing for VoIP traffic.
|
|
-
|
no voip-queue
|
Disable VoIP queueing and re-enable WFVQ
|
|
-
|
voip-queue-delay
|
Set the maximum query delay for which to estimate the high priority queue size necessary to meet the queuing delay.
|
|
show queueing
|
-
|
Display the priority queue configuration
|
