For more information about these commands, see Avaya Branch Gateway G450 CLI Reference.
|
Root level command
|
Command
|
Description
|
|
clear frame-relay counters
|
-
|
Clear the frame relay counters
|
|
interface serial
|
-
|
Enter Serial interface or sub interface configuration mode
|
|
-
|
encapsulation
|
Set the encapsulation mode for a Serial interface
|
|
-
|
frame-relay class-dlci
|
Associate a Virtual Channel with a named QoS or Traffic shaping template (map-class)
|
|
-
|
frame-relay interface-dlci
|
Associate a frame relay Virtual Channel with the current interface
|
|
-
|
frame-relay lmi-n391dte
|
Set the number of status enquiry intervals that pass before issuing a full status enquiry message
|
|
-
|
frame-relay lmi-n392dte
|
Set the maximum number of unanswered status enquiries the equipment accepts before declaring the interface down
|
|
-
|
frame-relay lmi-n393dte
|
Set the number of status polling intervals over which the error threshold is counted (the monitored event count)
|
|
-
|
frame-relay lmi-type
|
Manually define the type of the Local Management Interface (LMI) to use
|
|
-
|
frame-relay priority-dlci-group
|
Assign Virtual Channels to priority classifications, for supporting traffic separation
|
|
-
|
frame-relay traffic-shaping
|
Turn on or off traffic shaping and frame relay fragmentation
|
|
-
|
ip address
|
Configure an IP address and mask for the interface
|
|
show interfaces
|
-
|
Display interface configuration and statistics for a particular interface or all interfaces
|
