Configuring the initial WAN

Last Updated : Apr 03, 2020 |
Prolog information
Metadata
Keywords:
  1. Add one of the following WAN media modules:
    • Avaya MM340 E1/T1 media module
    • Avaya MM342 USP media module
    ADDITIONAL INFORMATION:
    Note:
    You can also use the Fast Ethernet port on the Branch Gateway chassis as the endpoint for a WAN line by configuring this interface for PPPoE.
  2. Connect the WAN line to the media module.
    ADDITIONAL INFORMATION:
    For more information see
    For more information, see Installing and Upgrading the Avaya Branch Gateway G450.
  3. Configure the WAN interface on the WAN media modules MM340 and MM342.
  4. By default, a Branch Gateway WAN interface uses Point-to-Point Protocol (PPP).
  5. If you want frame relay encapsulation on the WAN, configure frame relay.
  6. Test the WAN configuration.
    ADDITIONAL INFORMATION:
    See WAN configuration and testing connectivity section.
  7. Enter copy running-config startup-config to save the configuration.
Related links
Configuring PPPoE