Ensure that you set the following fields on the Optional Features screen to y:
IP Stations
H.323 Trunks
Remote Office
If the IP Stations, H.323 Trunks, and Remote Office is set to n, the shuffling fields on the IP Network Regions screen do not display. You must enable these in the License File of the system.
On the SAT screen, type change ip-network-regionnumber and press Enter.
ADDITIONAL INFORMATION:
The system displays the IP Network Region screen.
In Intra-region IP-IP Direct Audio and Inter-region IP-IP Direct Audio type one of the following:-
y: Permits shuffling the call.
n: Does not permit shuffling the call.
native: Uses the IP address of a telephone itself, or no translation by a Network Address Translation (NAT) device.
translated: Uses the translated IP address that a Network Address Translation (NAT) device provides for the native address.
ADDITIONAL INFORMATION:
TheIntra-region IP-IP Direct Audio field permits shuffling if both endpoints are in the same region. The Inter-region IP-IP Direct Audio field permits shuffling if the two endpoints are in two different regions.
Note:
If a NAT device is not in use, then the native and translated addresses are the same. For more information about NAT, see Administering Avaya Aura® Communication Manager and Avaya Aura® Core Solution Description.
On the Inter Network Region Connection Management screen, administer the common codec sets.
ADDITIONAL INFORMATION:
For more information about the fields on this screen, see Avaya Aura® Communication Manager Screen Reference.
Note:
You can connect IP endpoints in different network regions only when you enter the codec set to be used in the matrix. Also, you cannot share PROCR, Avaya Aura® Media Server, or G4xx Media Gateway resources among network regions.
Note:
Use any of the following commands for a list of codecs:
