AEServices SNMP traps Alarm Codes and Messages - Part 4

Last Updated : May 23, 2024 |
SNMP Object Name csDiskUsageThreshold
SNMP OID .1.3.6.1.4.1.6889.2.18.1.1.1.0.8
SNMP Object Description Disk usage has exceeded.
Remediation Suggestions Use the Linux df command to narrow down the affected partition and then perform clean up. For example, the removal of core files or old log files.
Alarm Code
Alarm Message
INADS Trap
NMS Trap
Alarm Severity
ACORE00008
High disk utilization /dev/mapper/rhel-var 80 percent used*
Yes
Yes
Minor
ACORE00010
Log disk exceeded 90% storage
Yes
Yes
Minor
ACORE00011
Log disk automatically cleared upto 70%
Yes
Yes
Cleared
Note:
*: The alarm message shows 80% disk occupancy for the given partition.
Note:
Application Enablement Services supports the alarm code ACORE00010 and ACORE00011 of csDiskUsageThreshold alarm from Release 8.1.2 and later.
SNMP Object Name csDiskFull
SNMP OID .1.3.6.1.4.1.6889.2.18.1.1.1.0.9
SNMP Object Description Disk is full.
Remediation Suggestions Use the Linux df command to narrow down the affected partition and then perform clean up. For example, remove core files or old log files.
Alarm Code
Alarm Message
INADS Trap
NMS Trap
Alarm Severity
ACORE00009
/dev/mapper/rhel-var_lib_ldap disk is full**
Yes
Yes
Major
Note:
**: The alarm message shows 100% disk occupancy for the given partition.
SNMP Object Name csCPUUtilization
SNMP OID .1.3.6.1.4.1.6889.2.18.1.1.2.0.1
SNMP Object Description CPU utilization is at least 80%.
Remediation Suggestions Using the information in the SNMP Trap/Notification and possible the Linux top command to investigate and determine the service or services that is using an excessive amount of the CPU time. This maybe a service not operating correctly or the load on the server may need to be distributed.
Alarm Code
Alarm Message
INADS Trap
NMS Trap
Alarm Severity
ACORE00021
CPU: CPU utilization exceeded 80%
Yes
Yes
Minor
SNMP Object Name csMemoryUtilization
SNMP OID .1.3.6.1.4.1.6889.2.18.1.1.2.0.2
SNMP Object Description Memory utilization exceeded 90%
Remediation Suggestions Using the information in the SNMP Trap/Notification and possible the Linux top command to investigate and determine the service or services that is using an excessive amount of memory. This maybe a service not operating correctly or the load on the server may need to be distributed.
Alarm Code
Alarm Message
INADS Trap
NMS Trap
Alarm Severity
ACORE00022
Memory: Memory utilization exceeded 90%
Yes
Yes
Major
Note:
Application Enablement Services supports the alarm code ACORE00022 from Release 10.1 and later.
SNMP Object Name csRemoteBackupFailed
SNMP OID .1.3.6.1.4.1.6889.2.18.1.1.6.0.2
SNMP Object Description Remote backup failed
Remediation Suggestions Validate whether the remote IP is reachable from the AE Services server and the credentials are correct. Reconfigure the backup if the credentials are changed.
Alarm Code
Alarm Message
INADS Trap
NMS Trap
Alarm Severity
ACORE00023
Remote backup failed
Yes
Yes
Major
Note:
Application Enablement Services supports the alarm code ACORE00023 from Release 10.1 and later.
SNMP Object Name csSecurityFileModified
SNMP OID .1.3.6.1.4.1.6889.2.18.1.1.3.0.4
SNMP Object Description File modified.
Remediation Suggestions Review the AIDE report to determine the modified file to take the appropriate corrective action. Afterwards update the AIDE database.
Alarm Code
Alarm Message
INADS Trap
NMS Trap
Alarm Severity
ACORE00044
Security: a file has been modified illegally
No
Yes
Minor
SNMP Object Name csSecurityFileRemoved
SNMP OID .1.3.6.1.4.1.6889.2.18.1.1.3.0.5
SNMP Object Description File Removed.
Remediation Suggestions Review the AIDE report to determine the deleted file to take the appropriate corrective action. Afterwards update the AIDE database. For log and trace files refer the log and trace retention policy list.
Alarm Code
Alarm Message
INADS Trap
NMS Trap
Alarm Severity
ACORE00045
Security: a file has been removed illegally
No
Yes
Minor
ACORE00048
Logs are deleted manually.
No
Yes
Warning
ACORE00049
Traces are deleted manually.
No
Yes
Warning
Note:
Application Enablement Services supports the alarm code ACORE00048 and ACORE00049 of csSecurityFileRemoved alarm from Release 8.1.2 and later.
SNMP Object Name csSecurityFileAdded
SNMP OID .1.3.6.1.4.1.6889.2.18.1.1.3.0.6
SNMP Object Description File Added.
Remediation Suggestions Review the AIDE report to determine the added file to take the appropriate corrective action. Afterwards update the AIDE database.
Alarm Code
Alarm Message
INADS Trap
NMS Trap
Alarm Severity
ACORE00046
Security: a file has been added illegally
No
Yes
Minor