Enabling and disabling data collection

Last Updated : Oct 05, 2012 |
Prolog information
Use this procedure to temporarily enable or disable an HMDC data collection event.
  1. From the AE Services Management Console main menu, select Utilities >HMDC>Configuration.
  2. On the Historical Metric Data Collection Configuration page, select the metric group data collection event you want to enable or disable.
    STEP RESULT:
    The Current Status column displays whether the selected data collection event is enabled or disabled.
  3. Perform one of the following steps:
    • If you want to enable the selected data collection event, click Enable.
    • If you want to disable the selected data collection event, click Disable.
  4. On the Disable HMDC metric group page, click Apply to confirm your action.
    STEP RESULT:
    The Current Status column displays the updated status for the selected data collection event.