Enabling multifactor authentication

Last Updated : May 16, 2019 |
Prolog information
Use this procedure to enable multifactor authentication. AE Services enables multifactor authentication when configured in a secure mode.
Before you begin
Before you enable multifactor authentication, ensure the following:
  • Ensure that your web browser is configured with the identity certificate.
  • Create Root CA certificate and client certificate. See, Using OpenSSL as a Certificate Authority (CA) to generate signed certificates.
  • The root CA certificate used to sign the identity certificate is imported into the AE Services server using the Management Console screen.
  • On the web browser, import the client certificate. Note that, if you do not install certificates, enabling secure mode fails.
  • Using the command line interface, create another root user on the AE Services server with same user name as on the client certificate.
  1. On the AE Services server command line interface, run the following command:
    ADDITIONAL INFORMATION: /opt/mvap/bin/enableMFA on
  2. When the system prompts, enter the required parameters.
    ADDITIONAL INFORMATION:
    After the completion of the process, the server reboots for changes to take effect.
  3. In the secure mode, log in first using the management console before logging in to the command line interface.
    ADDITIONAL INFORMATION:
    Do not use the default user name created during the deployment process.