Obtaining Communication Manager input configuration details for migration

Last Updated : Dec 05, 2024 |
Prolog information
Metadata
Keywords:
Use this procedure to note down all the available input configuration details of Communication Manager so that you can use these configuration details for restoring Communication Manager on the ASP R6.0.x (KVM on RHEL 8.10) host.
  1. Log in to Communication Manager SMI.
  2. In AdministrationServer (Maintenance)Server ConfigurationServer Role screen, note down the value of This Server's Memory Setting.
  3. In AdministrationServer (Maintenance)Server ConfigurationNetwork Configuration screen, note down the values of Host Name, DNS Domain, DNS IP Addresses, Server ID, IPv6 Details, Default Gateway, IP Configuration of all the networks (Public, OOBM, and Duplex), and Subnet mask.
  4. In AdministrationServer (Maintenance)SecurityServer Access screen, note down whether Avaya Service Access via EASG is enabled or disabled.
  5. In AdministrationServer (Maintenance)Server ConfigurationNTP Configuration screen, note down values of NTP Servers.
  6. In AdministrationServer (Maintenance)Server UpgradesManage Updates screen, note down (SP/FP/Patch and SSP) details.
  7. In AdministrationLicensingWebLM Configuration screen, note down WebLM Server address.
  8. Log in to Communication Manager CLI and run the following command # encryptionStatus and note down the encryption status.