Enabling the 8444 port on Avaya Aura® Web Gateway

Last Updated : Jun 27, 2021 |
Use this procedure to enable the 8444 port on Avaya Aura® Web Gateway to properly handle the media for external users. All requests from remote clients such as customer reference client or remote Avaya WebRTC Connect agents, must go to the remote access port 8444 and not to 443. It specifies that Avaya Aura® Web Gateway can identify remote and local clients.
  1. In your web browser, enter the following URL:
    ADDITIONAL INFORMATION:
    https://<Avaya Aura Web Gateway_FQDN>:8445/admin
  2. On the Avaya Aura® Web Gateway administration portal, click External AccessHTTP Reverse Proxy.
  3. Select the Enable port for remote access check box.
  4. In the Front-end port for remote access field, enter the port number 8444.
    ADDITIONAL INFORMATION:
    Avaya Aura® Web Gateway uses this port number to distinguish between clients on the internal network and external clients on the internet. Internal clients use the standard 443 port whereas external clients such as Browsers, Android, and iOS use the 8444 port to access Avaya Aura® Web Gateway. Based on the port number, Avaya Aura® Web Gateway sets the media paths.
  5. Click Save.