Configuring Avaya Aura® Session Border Controller networks

Last Updated : Jun 20, 2021 |
Prolog information
  1. Log in to the EMS web interface with administrator credentials.
  2. In the navigation pane, click Device Specific SettingsNetwork ManagementInterfaces.
  3. On the Interfaces page, enable the following interfaces:
    ADDITIONAL INFORMATION:
    • A1 internal interface
    • B1 external interface
  4. On the Networks tab, configure the following networks:
    ADDITIONAL INFORMATION:
    • A1 internal network
    • B1 external network
  5. For external web and mobile access, assign IP addresses to each network as follows:
    ADDITIONAL INFORMATION:
    External IP addresses:
    • One IP address for the Avaya Aura® Web Gateway reverse proxy
    • One IP address for the TURN relay service
    Internal IP addresses:
    • One IP address for the Avaya Aura® Web Gateway reverse proxy
    • One IP address for the TURN relay service