Configure global settings to set up OSD menu and video orientation, DVI and SDI modes, PTZ preset parameters, and other settings.
On the main menu, select Display.
On the Display menu, for the OSD-Dir setting, select the OSD menu orientation.
STEP RESULT:
The OSD menu orientation changes automatically.
For the Frac Rate setting, select one of the following options:
On
Off
ADDITIONAL INFORMATION:
To apply the changes for this setting, you must reboot the camera.
For the Video Format setting, select the output video format.
For the DVI Mode setting, select one of the following DVI connector output types:
HDMI
DVI
For the SDI Mode setting, select the type of the SDI output interface.
ADDITIONAL INFORMATION:
Level A supports one 3G stream. Level B supports two 1.5G streams: one dual-link stream or two separate streams.
For the Flip-H setting, select one of the following options:
On: To invert the video image horizontally.
Off: To display the original video image.
For the Flip-V setting, select one of the following options:
On: To invert the video image vertically.
Off: To display the original video image.
For the Freeze at calling preset setting, select one of the following options:
On: The video image freezes at the last frame of the previous PTZ position when the camera moves to another PTZ preset position. The video image resumes when the camera fully takes the new position.
Off: The video image reflects the camera movements as it takes the new PTZ position.
For the Save isp param at preset setting, select one of the following options:
On: To save the current Image Signal Processor (ISP) camera parameters when configuring PTZ presets. The ISP parameters include brightness, white balance, sharpness, noise reduction, auto focus, and other parameters.
Off: Not to save the current ISP parameters for the PTZ presets.
For the Display Info setting, select one of the following options:
On: To show the camera metadata on top of the video.
Off: To display only the video.
For the GDC setting, select one of the following options:
On
Off
ADDITIONAL INFORMATION:
To apply the changes for this setting, you must reboot the camera.
