Configuring system features checklist

Last Updated : Apr 16, 2025 |
Prolog information
Metadata
Keywords:
No
Task
Procedure reference
1.
Verify that CMS is installed by checking the version
Verifying that CMS is installed
2
Initialize the CMS database
See Powering up the virtual machine.
3.
Set the root password.
Setting the root password
4.
Configure the system network.
Configuring the system network
5.
Configure WebLM and EASG.
Configuring WebLM, EASG, and the encryption passphrases
6.
Install any CMS patches that apply to the CMS release.
Installing CMS patches
7.
Update the Linux RPMs for your CMS release, if required.
Updating Linux RPMs
8.
Turn on IDS and initialize Informix.
Turning on IDS and adding disk space for medium and large configurations
9.
Verify that the CMS system starts up properly and that you can access it remotely.
Verifying system startup and remote access
10.
Proceed to configuring CMS features.
See Configuring CMS features checklist.