Adding a SIP trunk group

Last Updated : Sep 19, 2013 |

About this task

Use this procedure to add a SIP trunk group to the SIP signaling group for call routing from Communication Manager to Session Manager.

Procedure

  1. On the Communication Manager SAT interface, type add trunk-group next, and press Enter.

    The system displays the TRUNK GROUP screen.

  2. Note the value of the Group Number field.
  3. In the Group Type field, type sip.
  4. In the Group Name field, type a name for the trunk group.
  5. In the TAC field, type a dial access code (DAC).

    For example, *110.

  6. In the Direction field, type two-way.
  7. In the Service Type field, type tie.
  8. In the Signaling Group field, type the SIP signaling group number that you added using the Adding a SIP signaling group procedure.
  9. In the Number of Members field, type the number of trunk group members.

    The maximum number of members that you can add is 255.

  10. In the Numbering Format field, type one of the following:

    • Type unk-pvt for a private network.

    • Type public for a trunk that receives ARS calls.

    • Type private for a trunk that receives SIP calls.

  11. Save the changes.