Administering the ARS analysis table

Last Updated : Sep 19, 2013 |

Procedure

On the Communication Manager SAT interface, type change ars analysis x, where x is a digit string, and press Enter.

The system displays the ARS DIGIT ANALYSIS TABLE screen.
In the Dialed String field, type the digits.
In the Min field, type the minimum number of allowed digits.
In the Max field, type the maximum number of allowed digits.
In the Route Pattern field, type the route pattern number.
In the Call Type field, type the appropriate call type.

For administering Communication Manager as a feature server and trunk gateway, type pubu.

Save the changes.

The following table specifies the values that you can enter in the fields.

Dialed String	Total Min	Total Max	Route Pattern	Call Type	ANI Reqd
`1`	`11`	`11`	`10`	`natl`	`n`
`101xxxx0`	`8`	`8`	`deny`	`op`	`n`
`101xxxx0`	`18`	`18`	`deny`	`op`	`n`
`101xxxx01`	`16`	`24`	`deny`	`iop`	`n`
`101xxxx011`	`17`	`25`	`deny`	`intl`	`n`
`101xxxx1`	`18`	`18`	`deny`	`fnpa`	`n`
`10xxx0`	`6`	`6`	`deny`	`op`	`n`
`10xxx0`	`16`	`16`	`deny`	`op`	`n`
`10xxx01`	`14`	`22`	`deny`	`iop`	`n`
`10xxx011`	`15`	`23`	`deny`	`intl`	`n`
`10xxx1`	`16`	`16`	`deny`	`fnpa`	`n`
`1200`	`11`	`11`	`deny`	`fnpa`	`n`
`1209`	`11`	`11`	`10`	`natl`	`n`
`1300`	`11`	`11`	`deny`	`fnpa`	`n`
`1400`	`11`	`11`	`deny`	`fnpa`	`n`

Send Feedback