Although private numbering is used for registration and signaling, the calling private number adapts to a public number when the called number is identified as a public number. For example, a call to a public network.
In Communication Manager, you must perform the additional administration for the private numbering.
The administration for this numbering requires an adaptation in Session Manager for the public number of a user.
The configuration is for the following numbering types:
The following table describes the administration settings for Call to public extension variation 2.
SAT screen |
Page number |
Field |
Value |
Notes |
TRUNK GROUP |
3 |
Numbering Format |
private |
|
AAR DIGIT ANALYSIS TABLE |
1 |
Dialed String |
Private long or short number |
The value of the Dialed String field is an extension or a pattern of extensions. |
|
1 |
Route Pattern |
Pattern to route to Session Manager |
|
|
1 |
Call Type |
unku |
|
NUMBERING - PRIVATE FORMAT |
1 |
Ext Code |
Extension number or pattern for extension numbers |
|
|
1 |
Trk Grp (s) |
blank |
Blank means the setting applies to all trunks. |
|
1 |
Private Prefix |
blank |
|
|
1 |
Total Len |
Extension length |
|
NUMBERING - PUBLIC/UNKNOWN FORMAT |
|
|
|
No entries. The adaptation to public numbering is performed in Session Manager. |
ROUTE PATTERN |
1 |
Grp Num |
Trunk group number |
Lists trunk groups with the trunks to primary Session Manager listed first. |
|
1 |
FRL |
0 |
|
|
1 |
Numbering format |
unk-unk |
|
INCOMING CALL HANDLING TREATMENT |
|
|
|
No entries. |
