Use the following procedure to add the entries for SIP and non-SIP station calls. AAR routes calls within a company over the private network of the company.
Procedure
On the Communication Manager SAT interface, type change aar analysisx, where x is a digit string, and press Enter.
The system displays the AAR DIGIT ANALYSIS TABLE screen.
In the Dialed String field, type xxyy, where xx are the digits that you entered for the Replacement String field on the ARS DIGIT CONVERSION TABLE screen, and yy are the first two digits of the extension of the IMS user.
In the Min field, type the minimum number of allowed digits.
In the Max field, type the maximum number of allowed digits.
In the Route Pattern field, type a route pattern number to the trunk group for the dialed string digits.
For administering Communication Manager as a feature server and trunk gateway, type a route pattern to the IMS-trunk group.
In the Call Type field, type pubu.
In the ANI Req field, type n.
The following table specifies the values that you can enter in the fields.
Dialed String
Total Min
Total Max
Route Pattern
Call Type
ANI Reqd
1
11
11
10
aar
n
3
5
5
11
aar
n
In the table, two entries are used:
For non-SIP station calls, Communication Manager sends the 11-digit numbers starting with 1 to route pattern number 10. Communication Manager prepends a plus (+) sign before routing the call to Session Manager.
For SIP station calls, Communication Manager sends the five-digit numbers starting with 3 route pattern 11. Communication Manager routes the call to Session Manager without prepending a plus (+) sign.
