Gateway

Last Updated : Apr 21, 2016 |
Navigation: System SettingsLineAdd/Edit Trunk LineIP DECT LineGateway
Prolog information
Metadata
Keywords:
Resource Id: line117
This form is used to configure aspects of information exchange between the IP Office and IP DECT systems.
When creating an IP DECT line, these settings are mergeable. You can also remove an IP DECT line without rebooting. Changing an IP DECT line that has been imported into the configuration is not mergeable.
Field
Description
Auto-Create Extension
Default = Off.
If enabled, subscription of a handset with the DECT system causes the auto-creation of a matching numbered extension within the system configuration if one does not already exist. This setting is not supported on systems configured to use WebLM server licensing.
For security, auto-create is automatically disabled after 24 hours.
Auto-Create User
Default = Off.
This option is only usable if Auto-Create Extension is also enabled. If enabled, subscription of a handset with the DECT system causes the auto-creation of a matching user within the system configuration if one does not already exist.
For security, any auto-create settings set to On are automatically set to Off after 24 hours.
Enable DHCP Support
Default = Off
This option is not supported for use with Avaya IP DECT R4. The IP DECT base stations require DHCP and TFTP support. Enable this option if the system is being used to provide that support, using IP addresses from its DHCP range (LAN1 or LAN2) and its TFTP server setting. If not enabled, alternate DHCP and TFTP options must be provided during the IP DECT installation.
  • If it is desired to use the system for DHCP support of the ADMM and IP DECT base stations only, the system address range should be set to match that number of addresses. Those addresses are then taken during the system restart and will not be available for other DHCP responses following the restart.
  • For larger IP DECT installations, the use of a non-embedded TFTP software option other than Manager is recommended.
Boot File
Default = ADMM_RFP_1_0_0.tftp. Range = Up to 31 characters.
The name and path of the ADMM software file. The path is relative to the TFTP server root directory.
ADMM MAC Address
Default = 00:00:00:00:00:00
This field must be used to indicate the MAC address of the IP DECT base station that should load the ADMM software file and then act as the IP DECT system's ADMM. The address is entered in hexadecimal format using comma, dash, colon or period separators.
VLAN ID
Default = Blank. Range = 0 to 4095.
If VLAN is being used by the IP DECT network, this field sets the VLAN address assigned to the base stations by the system if Enable DHCP Support is selected.
  • The system itself does not apply or use VLAN marking. It is assumed that the addition of VLAN marking and routing of VLAN traffic is performed by other switches within the customer network.
  • An ID of zero is not recommended for normal VLAN operation.
  • When blank, no VLAN option is sent to the IP DECT base station.
Base Station Address List
Default = Empty
This box is used to list the MAC addresses of the IP DECT base stations, other than the base station being used as the ADMM and entered in the ADMM MAC Address field. Right-click on the list to select Add or Delete. or use the Insert and Delete keys. The addresses are entered in hexadecimal format using comma, dash, colon or period separators.
Enable Provisioning
This option can be used with DECT R4 systems. It allows the setting of several values in the system configuration that previously needed to be set separately in the master base stations configuration. For full details refer to the DECT R4 Installation manual. The use of provisioning requires the system security settings to include an IPDECT Group.
SARI/PARK
Default = 0
Enter the PARK (Portable Access Rights Key) license key of the DECT R4 system. DECT handset users enter this key when subscribing to the DECT system.
Subscriptions
Default = Disabled
Select the method of subscription supported for handsets subscribing to the DECT R4 system. The options are:
  • Disabled:Disables subscription of handsets.
  • Auto-Create: Allow anonymous subscription of handsets. Once subscribed, the handset is assigned a temporary extension number. That extension number can be confirmed by dialing *#. A new extension number can be specified by dialing <Extension Number>*<Login Code>#. The Auto-Create Extension and Auto-Create User settings above should also be enabled. While configured to this mode, Manager will not allow the manual addition of new IP DECT extensions.
  • Preconfigured: Allow subscription only against existing IP DECT extensions records in the system configuration. The handset IPEI number is used to match the subscribing handset to a system extension.
Authentication Code
Default = Blank.
Set an authentication code that DECT handset users should enter when subscribing to the DECT system.
Enable Resiliency
Default = Off.
Enables resiliency on the IP DECT Line. To configure resiliency, you must also configure an IP Office Line with Backs up my IP Dect Phones set to On.
Status Enquiry Period
Default = 30 seconds.
The period between successive verifications on the H.323 channel. The smaller the interval, the faster the IP DECT system recognizes that IP Office is down.
Prioritize Primary
Default = Off.
Only available when Enable Provisioning is set to On.
Set to On for automatic fail-over recovery. When on, the IP DECT system switches automatically from the backup IP Office to the "primary" IP Office.
Note that the IP DECT system does not switch back automatically from the backup IP Office to the primary. The IP DECT system must be manually switched using Web Manager.
Supervision Timeout
Default = 120 seconds.
Only available when Enable Provisioning is set to On.
The period of time the IP DECT system will wait between attempts to switch from the backup IP Office to its "primary" IP Office.
Related links
IP DECT