Reconfiguring SNMP alarm destinations

Last Updated : Feb 24, 2023 |
Prolog information
After upgrading the Avaya Analytics™ to latest release, you must reconfigure alarms with Avaya™ Services as a destination as it was configured in previous release.
For reconfiguring you need to remove destinations from Avaya Analytics™ SNMP configuration and then add it again.
Before you begin
Ensure that you have Passwords of the SNMPv3 user configured for the NMS, Authentication passwords and Privacy passwords for the existed at the current configuration SNMP destinations.
  1. Log in to the Cluster Control Manager (CCM) console as the customer user.
  2. Switch to being the root user by entering the command su.
  3. To run the Analytics Administration script, use the following command:
    ADDITIONAL INFORMATION:
    ccm release orca analytics
  4. To select the SNMP option, enter the corresponding number.
  5. To select the List the current destination for sending SNMP alarms option, enter the corresponding number.
  6. Copy and save the result list of destinations to a file.
  7. Return to the previous page by entering b.
  8. To select the Delete configured destination address option, enter the corresponding number.
  9. In the Proceed with SNMP Destination deletion field, type y.
    ADDITIONAL INFORMATION:
    Entering n cancels the operation.
  10. Enter the Destination IP address, which needs to be deleted from destinations configuration
  11. Return to the previous page by entering b.
  12. Repeat the above deletion steps to delete all the destinations mentioned in the saved list of destinations.
  13. Add all the SNMP destinations using the saved list of destinations.
    ADDITIONAL INFORMATION: