Customer configuration data for Application Enablement Services

Last Updated : Feb 10, 2020 |

The following table identifies the key customer configuration information that will be required throughout the deployment and configuration process for Application Enablement Services.

Required Data

Description

Example value for the system

Hostname or fully-qualified domain name

Hostname or fully-qualified domain name for the virtual machine.

aesserver1

DNS

DNS search path.

Note:

If you leave this value blank, modify or add the line search <dns search path> in the file etc/resolv.conf after you deploy the Application Enablement Services virtual machine successfully.

example.com

Default Gateway

Default gateway address for the virtual machine.

123.45.67.254

DNS IP Address

Domain name servers for the virtual machine.

123.45.1.2

IP address

IP address for the virtual machine interface for eth0 (Public interface).

123.45.67.89

Netmask

Netmask or prefix for the virtual machine interface for eth0 (Public interface).

255.255.255.0

IP address

IP address for the virtual machine interface for eth1 (Private interface) (optional).

123.45.67.90

Netmask

Enter the Netmask or prefix for the virtual machine interface for eth1 (Private interface) (optional).

255.255.255.0

IP address

IP address for the virtual machine interface for eth2 (optional).

For IPv4: 192.168.x.x

For IPv6: 2001:0db8::a

Netmask

Netmask or prefix for the virtual machine interface for eth2 (optional).

255.255.0.0

NTP Server

Network Time Protocol (NTP) hostname or IP address (optional).

For IPv4: 172.16.x.x

For IPv6: 2001:0db8::b

EASG status

EASG

Enable or Disable

Data Encryption

Data Encryption

Enable or Disable
Note:

  • DHCP will not take effect until you configure it from the command line after initial deployment.

  • Do not expect Application Enablement Services to initiate DHCP on first boot.

  • Avaya recommends that you do not use DHCP with Application Enablement Services.